NOTICE - This service data sheet is intended for use by persons having electrical
and mechanical training and a level of knowledge of these subjects generally
considered acceptable in the appliance repair trade. The manufacturer cannot
be responsible, nor assume any liability for injury or damage of any kind arising
from the use of this data sheet.
SAFE SERVICING PRACTICES
To avoid the possibility of personal injury and/or property damage, it is important
that safe servicing practices be observed. The following are examples, but without
limitation, of such practices.
1. Before servicing or moving an appliance remove power cord from electrical outlet,
trip circuit breaker to OFF, or remove fuse.
2. Never interfere with the proper installation of any safety device.
IMPORTANT
DO NOT REMOVE THIS BAG
OR DESTROY THE CONTENTS
WIRING DIAGRAMS AND SERVICE
INFORMATION ENCLOSED
REPLACE CONTENTS IN BAG
p/n A00498602 Rev A (1408)
SERVICE DATA SHEET
36” INDUCTION COOKTOP
3. GROUNDING: The standard color coding for safety ground wires is GREEN or
GREEN WITH YELLOW STRIPES. Ground leads are not to be used as current
carrying conductors. It is extremely important that the service technician
reestablish all safety grounds prior to completion of service. Failure to do
so will create a potential safety hazard.
4. Prior to returning the product to service, ensure that:
• All electric connections are correct and secure.
• All electrical leads are properly dressed and secured away from sharp edges,
high-temperature components, and moving parts.
• All uninsulated electrical terminals, connectors, heaters, etc. are adequately
spaced away from all metal parts and panels.
• All safety grounds (both internal and external) are correctly and securely
reassembled.
Electronic Surface Element Control (ESEC)
This cooktop is equipped with an Electronic Surface Element
Control (ESEC), which precisely controls the smoothtop cooking
elements at multiple settings. For the user, the elements are
operated by pressing the touch pads located on the control panel
for the desired settings. The control settings are shown in 2-digit
displays.
Hot Surface display message - If any of the induction elements
are hot, the hot surface message (HE) will display and remain ON
until the cooktop cools.
ESEC lockout feature - The Cooktop Lockout features will not
operate when a surface element is ON. Conversely, the surface
elements controlled by the ESEC will not operate when Cooktop
Lockout mode is active. When the control is in Cooktop Lockout
mode, will appear in the display to signify that the surface heating
elements are locked out.
Replacing an induction element
Whenever replacing any induction element use only the screws
supplied with the range to secure the element to the mounting
panel. Never use any other type of screw to attach the induction
element.
* Please note: Electronic boards are very sensitive to static elec-
tricity. Static electricity can permanently damage electronic boards.
Before handling these parts, be sure to drain static electricity from
your body by properly grounding yourself.
PLAQUETTE D'INTERFACE
DE UTILISATEUR
PANNEAU TACTILE
CORE MAGNETIQUE
(4 TOURS)
ALIMENTATION ÉLECTRIQUE
INDUCTOR-ARRIÈRE GAUCHE
INDUCTOR-AVANT GAUCHE
INDUCTOR-ARRIÈRE DROITE
INDUCTOR-AVANT CENTRE
INDUCTOR-AVANT DROIT INTERNE
INDUCTOR-AV. DROITE EXTER.
BC3 TO USER INTERFACE BOARD
Á PLAQUETTE D'INTERFACE DE UTILISATEUR
THERMAL CUT-OUT
COUPE-CIRCUIT THERMIQUE
GENERATOR BOARD-LEFT SIDE
CARTE GENERATEUR-COTE GAUCHE
GENERATOR BOARD-CENTER
CARTE GENERATEUR-CENTRE
BC3
B81
BC4
B71
TAB1
TAB2
BC1
TAB102
TAB101
BC5
BPL1
BPL2
BPN2
BPN1
BPE03
BC3
B81
BC4
B71
TAB1
TAB2
BC1
TAB102
TAB101
BC5
BPL1
BPL2
BPN2
BPN1
BPE03
THERMAL CUT-OUT
COUPE-CIRCUIT THERMIQUE
THERMAL CUT-OUT
COUPE-CIRCUIT THERMIQUE
GENERATOR BOARD-RIGHT SIDE
CARTE GENERATEUR-COTE DROIT
BC3
B81
BC4
B71
TAB1
TAB2
BC1
TAB102
TAB101
BC5
BPL1
BPL2
BPN2
BPN1
BPE03
ID JUMPER: ADDRESS 1
DO NOT CONNECT BC1
IDENTIFICATEUR: ADRESSE 2
NE PAS BRANCHER BC1
ID JUMPER: ADDRESS 2
CONNECT BLACK JUMPER TO BC1
IDENTIFICATEUR: ADRESSE 2
BRANCHEZ EN UTILISANT
FAISCEAU-FIL NOIR BC1
ID JUMPER: ADDRESS 3
CONNECT RED JUMPER TO BC1
IDENTIFICATEUR: ADRESSE 2
BRANCHEZ EN UTILISANT
FAISCEAU-FIL ROUGE BC1
Indicated % Power Notes
0 0 Off
L* 1.5 Keep Warm
1 3 -
2 5.5 -
2.5 8 -
3 10.5 -
3.5 13 -
4 15.5 -
4.5 18 -
5 21 -
5.5 25 -
6 31 -
6.5 38 -
7 45 -
8 64 -
9 100 -
Pb 125-141 Boost
(24 pages)
(48 pages)
(6 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals